数学家传记
康拉德·楚泽是一位德国计算机先驱,发明了世界上第一台可编程计算机:Z3。
康拉德·楚泽在东普鲁士的布劳恩斯贝格长大,在那里他上了Humanistisches 文理中学(Gymnasium)。1927年,他进入柏林-夏洛滕堡技术高等学校,学习土木工程课程。正是这些工程学研究使楚泽在1934年左右对开发一种机械计算装置产生了兴趣。他发现他不得不花费许多小时[4]:-
……进行冗长的静力学计算,这在土木工程师的训练中非常重要……
毕业后,楚泽加入了亨舍尔飞机公司,从事应力分析工作。他特别研究了飞机机翼振动引起的应力。他的工作再次涉及大量计算,因此,为了帮助他进行这些计算,楚泽在他父母的客厅里建造了他的Z1计算机。他写道:-
我于1934年开始,独立工作,对我周围正在发生的其他发展一无所知。事实上,当我开始我的工作时,我甚至没有听说过查尔斯·巴贝奇。
楚泽于1938年完成了这台机器。它完全是机械的,算术单元由大量机械开关组成,存储器由玻璃层之间的金属条层组成。其最具创新性的特点之一是可以通过穿孔纸带进行编程。楚泽之所以能成功建造出他的机械计算机,而查尔斯·巴贝奇却失败了,主要原因是楚泽的Z1是一台二进制机器,用两个位置的开关来表示0和1。然而,说楚泽在Z1上取得了成功有点夸张,因为这台机器运行得并不好。存储器是一个成功的特性,命令通过机械连杆传递的方式则不成功。
楚泽开发更大更好的计算机Z2的计划涉及保持相同的存储器系统,但用机电继电器替换机械算术单元。然而,该项目因第二次世界大战而中断,当时楚泽被征召服兵役。他被编入德国步兵,但说服军队允许他返回建造计算机。
第三帝国的空气动力学研究所资助了他的工作,他完成了Z2的建造,这仍然是一台实验性计算机。然后他进展到建造Z3,这是楚泽建造的第一台用于使用而非测试其想法的计算机。Z2和Z3计算机是机电继电器机器,Z3于1941年完成,其机电存储器由继电器组成,还有一个机电算术单元。
当然,为了使其在计算中有用,Z3需要许多继电器,实际上它包含了大约2600个。它是第一台可运行的程序控制计算机,被德国航空工业用于求解联立方程组以及其他由处理承受应力的机身振动问题所产生的数学系统。
然而,当楚泽提出一种基于电子管的计算机时,该提议被拒绝了,理由是德国人如此接近赢得战争,因此不需要进一步的研究努力。
楚泽的一些计算机在战争接近尾声时的轰炸中被摧毁,尽管Z3在1960年被重建,用于在慕尼黑的一家博物馆展出。楚泽于1942年开始研制他的Z4计算机,当由于持续的空袭,它从柏林搬到哥廷根时,它几乎完成了。仅仅几周后,哥廷根就有被推进的俄罗斯军队占领的危险,Z4再次被转移,这次是到巴伐利亚的小村庄欣特施泰因。Z4被编码为Versuchsmodell 4,或V4,并藏在一所房子的地窖里。Ashurst写道[4]:-
由于V4与V1和V2飞行炸弹和火箭的关联,最终发现它的英美军队(首先进入村庄的法国人并未发现它)非常惊讶,因为他们各种各样的防范措施都是多余的,可怕的V4只不过是一堆机械零部件的集合体。
最后,Z4计算机被带到瑞士,于1950年安装在苏黎世的ETH。它在那里一直运行到1955年,之后被转移到巴塞尔附近的一家法国空气动力学研究所,在那里一直使用到1960年。
事实上,楚泽除了他的Z系列之外还设计了几台计算机。他的S1和S2计算机被用于计算生产飞机所需的精确测量值。对于S2,计算机包括测量装置,以对生产中的飞机进行测量,并将这些直接输入计算中。楚泽设计的L1计算机不是用于解决算术问题,而是设计用于解决逻辑问题。只生产了一个实验版本,没有对这个创新想法进行进一步的工作。
这些发展完全独立于美国的约翰·皮斯普·埃克特、约翰·莫克利和Howard 霍华德·艾肯,以及英国的艾伦·图灵。楚泽后来写道:-
战争最终结束后,宾夕法尼亚大学ENIAC机器的消息传遍了全世界——“18,000个电子管!”。我们只能摇头。所有这些电子管到底是为了什么?……被称为COLOSSUS的英国研发成果在参与工作的人员圈子之外无人知晓。直到很久以后,这个非常有趣的项目才揭开面纱。
楚泽于1950年成立了自己的计算机公司,该公司于1967年被西门子电子公司收购。1965年,他获得了Harry M Goode纪念奖,这是计算机学会颁发的奖章和2,000美元奖金:-
表彰他对自动计算做出的贡献和开创性努力;独立提出使用二进制系统和浮点运算;以及在德国设计出第一台程序控制计算机——世界上最早的计算机之一。
到1958年,他已经用上了Z22计算机,这是最早采用晶体管设计的计算机之一。楚泽继续从事计算机研究,并在1969年西门子公司完全接管楚泽的计算机公司后,担任西门子的顾问。
除了他的硬件开发,楚泽还对软件感兴趣,并于1945年开发了第一个被称为“Plankalkül”的算法编程语言。他使用该语言设计了一个下棋程序。尽管该语言没有被广泛使用,但它为下一代语言ALGOL奠定了基础,当然,ALGOL已成为世界范围内广泛使用的语言。
Konrad Zuse was brought up in Braunsberg, East Prussia where he attended the Humanistisches Gymnasium. He entered the Technische Hochschule of Berlin- Charlottenburg in 1927 where he took courses in civil engineering. It was these studies in engineering which led Zuse to become interested in developing a mechanical device for calculating around 1934. He found that he had to spend many hours [4]:-
... working through the long statics calculations which are so important in the training of civil engineers...
After graduating Zuse joined the Henschel Aircraft Company where he worked on stress analysis. In particular he studied the stresses caused by vibrations of an aircraft's wing. His work again involved a great deal of calculation and so, to help him perform these calculations, Zuse built his Z1 computer in his parents living room. He wrote:-
I started in 1934, working independently and without knowledge of other developments going on around me. In fact, I hadn't even heard of Charles Babbage when I embarked on my work.
Zuse completed the machine in 1938. It was entirely mechanical, with an arithmetic unit composed of large numbers of mechanical switches, and a memory consisting of layers of metal bars between layers of glass. One of its most innovative features was that it could be programmed by means of a punched tape. The main reason why Zuse succeeded in building his mechanical computer where Babbage had failed, was the fact that Zuse's Z1 was a binary machine with two position switches to represent 0 and 1. However, to say that Zuse succeeded with the Z1 is a bit of an exaggeration, for the machine did not work very well. The memory was a successful feature, the way that commands were transmitted through mechanical linkages was not successful.
Zuse's plans to develop a bigger and better computer the Z2 involved keeping the same memory system but replacing the mechanical arithmetic unit by electromechanical relays. However the project was interrupted by World War II when Zuse was called up for military service. He was put in the German infantry but persuaded the army to allow him to return to building computers.
The Third Reich's Aerodynamic Research Institute funded his work and he completed building the Z2 which was still an experimental computer. He then progressed to build the Z3 which was the first computer which Zuse built to be used rather than to test out his ideas. The Z2 and Z3 computers were electromechanical relay machines and the Z3, completed in 1941, had an electromechanical memory composed of relays as well as an electromechanical arithmetical unit.
Of course to make it useful for computation, the Z3 required many relays and it indeed it contained about 2600. It was the first operational program-controlled calculating machine and was used by the German aircraft industry to solve systems of simultaneous equations and other mathematical systems which were produced by the problems of dealing with the vibration of airframes put under stress.
However when Zuse proposed a computer based on electronic valves, the proposal was rejected on the grounds that the Germans were so close to winning the War that further research effort was not necessary.
Some of Zuse's computers were destroyed in bombing raids near the end of the war although the Z3 was reconstructed in 1960 for display in a museum in Munich. Zuse began work on his Z4 computer in 1942, and it was almost complete when, due to continued air raids, it was moved from Berlin to Göttingen. After only a few weeks Göttingen was in danger of being captured by the advancing Russian troops and the Z4 was moved again, this time to the small village of Hinterstein in Bavaria. The Z4 was coded the Versuchsmodell 4, or V4, and hidden in the cellar of a house. Ashurst writes [4]:-
Because of the association of V4 with the V1 and V2 flying bombs and rockets, the British and American troops who eventually found it (it had not been found by the French who entered the village first) were most surprised when their multifarious precautions were unnecessary and the fearsome V4 was just a conglomeration of mechanical bits and pieces.
Finally the Z4 computer was taken to Switzerland where it was installed in the ETH in Zürich in 1950. It remained operational there until 1955 when it was moved to a French aerodynamical research institute close to Basel where it remained in use until 1960.
In fact Zuse designed several computers other than those of his Z series. His S1 and S2 computers were used for computing the precise measurements necessary for the production of aircraft. For the S2 the computer included measuring devices to make measurements of the planes in production and to feed these directly into the calculations. The L1 computer which Zuse designed was not for solving arithmetical problems, but rather it was designed to solve logical problems. Only an experimental version was produced, no further work being done on this innovative idea.
These developments were entirely independent of those of John Eckert, Mauchly and Howard Aiken in the USA, and Turing in England. Zuse later wrote:-
After the War was finally over, news of the University of Pennsylvania ENIAC machine went all round the world - "18,000 tubes!". We could only shake our heads. What on earth were all the tubes for? ... The English development known as COLOSSUS was unheard of outside the circle of those working on it. It was only much later that the wraps came off this very interesting project.
Zuse set up his own computing company in 1950 and it was taken over by the Siemens electronics firm in 1967. In 1965 he had received the Harry M Goode Memorial Award, a medal and $2,000 awarded by the Computer Society:-
For his contributions to, and pioneering efforts in, automatic computing; for independently proposing the use of the binary system and floating-point arithmetic; and for designing the first program-controlled computer in Germany - one of the earliest in the world.
By 1958 he had reached the Z22 computer, which was one of the first to be designed with transistors. Zuse continued to undertake research on computers and acted as a consultant to Siemens after the firm took over complete control of Zuse's computer company in 1969.
As well as his hardware developments Zuse was also interested in software and he developed the first algorithmic programming language known as "Plankalkül" in 1945. He used the language to design a chess playing program. Although the language was not widely used it formed the basis for the next generation language ALGOL which, of course, became a widely used language world-wide.
正文里的方括号编号指向这里,悬停即可直接看到条目。书目保留原文——译了书名反而查不到文献。
原站列出的延伸阅读与外部数据库,照原样保留,目标多为英文页面。
原站的交叉引用。指向本站已镜像专题的留在站内,其余仍指回原站。